Action plan for nonconformities and corrective actions
A nonconformity is only closed once its cause has been eliminated and you have checked that. The action plan takes every nonconformity through exactly these steps and shows what is overdue.
Examples
Five completed nonconformities for orientation, invented values
| Nonconformity (what, where, against which requirement) | Cause | Corrective action (eliminates the cause) |
|---|---|---|
| Customer received 40 housings with a bore 0.3 mm out of tolerance (drawing revision C) | Inspection plan not updated after the drawing change; the change process does not inform quality assurance | Add the step “update inspection plan” to the change process, recheck open changes |
| Two drums of hydraulic oil in the warehouse without a drip tray | New storage area set up after a refit without checking the storage rules | Checklist for changes to storage areas, walk-through of all storage areas |
| Former employee still had access to the cloud storage three weeks after leaving | The HR leavers checklist contains no cloud accounts; IT learns about leavers late | A leaver automatically triggers a task for IT, list of all accounts per person, monthly reconciliation |
| Calibration of two callipers overdue | Calibration due dates only in a list without a responsible person | Due dates in the measuring equipment register with a responsible person and a reminder four weeks ahead |
| Two quality objectives for 2026 without measurement of progress | Objectives were set without stating how they are measured | Add key figure, measurement method and due date to the template for objectives |
more columns in the file: Source · Identified on · Standard · Correction (immediate) · Similar cases elsewhere? · Responsible · Due date · Effectiveness checked on · Result of the effectiveness check
Extract from the Excel file with example rows · the workbook has 3 sheets, highlighted columns are calculated by the template. The example values are invented.
What the template is for
Clause 10.2 describes what happens after a nonconformity: react and contain the consequences, determine the cause, check whether similar cases exist, implement corrective actions, review their effectiveness and document the whole thing.
Nonconformities come from many sources: internal and external audits, complaints, incidents, measurements. One shared plan for all sources shows top management and the auditor at a glance how well the cycle works.
What is in the file
- An “Instructions” sheet with the steps, the difference between correction and corrective action and a short guide to root cause analysis with five times “Why?”.
- An “Action plan” sheet with 60 rows: source, date, standard, description, correction, cause, similar cases, corrective action, responsible person, due date, status, effectiveness.
- A formula that flags overdue actions, and drop-down lists for source, standard and status.
- An “Examples” sheet with five completed nonconformities from an audit, a complaint and an information security incident.
How to fill it in
- 1
Describe the nonconformity as a fact: what, where, when, against which requirement. No judgement, no blame.
- 2
Enter the correction, that is what was done immediately to fix the error and its consequences, such as quarantining goods.
- 3
Determine the cause, for example with five times “Why?”, until you reach a cause you can eliminate.
- 4
Check whether the cause could produce the same nonconformity elsewhere, and enter the result.
- 5
Plan the corrective action that eliminates the cause, with a responsible person and a due date. The template flags what is overdue.
- 6
After a reasonable time, check effectiveness: has the nonconformity occurred again? Only then set the status to “Effective”.
The same steps are in the file on the “Instructions” sheet, together with the rating scales and the completed examples.
Common mistakes when filling it in
What most often goes wrong when filling in this file, and how to avoid it.
- A judgement instead of a description
- “Sloppiness in the warehouse” is not a nonconformity. The column asks what, where, when and against which requirement. Only a factual description makes the search for the cause possible.
- Correction and corrective action the same
- If both columns say “parts reworked”, the second step is missing. The correction fixes the error, the corrective action eliminates its cause; the second column therefore needs a different answer.
- The cause stops at a person
- “Employee was not paying attention” is almost never the end of the chain. Keep asking why the error was possible and why nobody noticed it. The “Instructions” sheet shows five times “Why?” with an example.
- “Similar cases” not decided
- If the choice stays empty or on “Not checked”, it is still open whether the same cause is at work elsewhere. Check it and choose “Yes” or “No”; with “Yes”, extending the action belongs in the corrective action.
- Status “Effective” without a check
- Only set the status once “Effectiveness checked on” and the result have been entered. The “Flag” column shows “check pending” while an implemented action has not been checked, and “overdue” when the due date has passed.
What an auditor checks for this clause and which nonconformities they often find is explained on the clause page: Clause 10.2: Nonconformities and corrective action.
Risks and actions in IMScollect
In IMScollect every nonconformity runs through five stages from correction to effectiveness check. Audit findings come in by themselves, and tasks remind you of due dates.
See it working in one system
In a free demo we show you how these lists work together in IMScollect, with your standards and your questions.
More templates
- ISO 27001Statement of Applicability (SoA)ISO 27001 clause 6.1.3 Information security risk treatment, Annex AExcel templateView
- ISO 9001ISO 14001ISO 27001Risk registerClause 6.1 Actions to address risks and opportunities (ISO 27001 also 6.1.2 and 6.1.3)Excel templateView
- ISO 14001Environmental aspectsISO 14001 clause 6.1.2 Environmental aspectsExcel templateView
- ISO 9001ISO 14001ISO 27001Management reviewClause 9.3 Management reviewWord templateView
