Glossary
Terms from ISO 9001, 14001 and 27001, briefly explained
The key terms of quality, environmental and information security management, in our own words and from the auditor’s view. Each term points to the clause where it matters.
0-9
- 5 Whys
- A root cause analysis method: you keep asking why, usually about five times, until you get from the visible effect to a cause that can actually be removed.
- 9001
- 8D report →
- A structured report for solving a problem in eight steps, from forming a team through containment and root cause analysis to permanent corrective action and recognising the team. Widely used for customer complaints in the automotive industry.
- 9001
A
- Access control
- The rules and technical measures that determine who may access which information, systems and rooms, following the principle of as much as necessary and as little as possible. Rights are granted, reviewed regularly and withdrawn when people change roles or leave.
- 27001
- Annex A (ISO 27001) →
- The catalogue of information security controls in ISO/IEC 27001, in the 2022 edition with 93 controls in four themes: organisational, people, physical and technological. It serves as a cross-check so that no necessary control is overlooked during risk treatment.
- 27001
- Asset (information asset) →
- Anything that has value to the organisation and needs protecting: information itself, but also systems, software, devices, premises and people’s knowledge. The inventory of assets is the basis for risk assessment in ISO/IEC 27001.
- 27001
- Audit
- A planned examination by people who are not assessing their own work, aimed at establishing from evidence how far defined requirements are met. There are internal audits, supplier audits and audits by a certification body.
- 90011400127001
- Audit criteria
- The yardstick used in an audit: the requirements of the standard, the organisation’s own procedures and policies, contracts and legal obligations. Without defined criteria, no nonconformity can be justified.
- 90011400127001
- Audit finding →
- A gap found during an audit between what a requirement asks for and what was observed. Certification bodies usually grade such findings as a major or minor nonconformity; both require correction and removal of the cause.
- 90011400127001
- Audit programme →
- The planning of all audits over a longer period, often the three-year certification cycle: which areas, processes and sites are audited when, how often and with what focus.
- 90011400127001
- Audit report
- The written summary of an audit: scope, criteria, samples examined, findings and conclusion. It must make clear what each judgement is based on.
- 90011400127001
- Availability
- One of the three protection goals of information security: information and systems are accessible to authorised people when they are needed. It is compromised by outages, attacks on accessibility or data lost without a backup.
- 27001
- Awareness →
- What everyone working for the organisation needs to know and understand: the policy, the objectives, their own contribution and the consequences of not following requirements. Awareness shows in behaviour, not in an attendance list.
- 90011400127001
B
- Business continuity management (BCM)
- Preparing for important business processes to keep running, or restart quickly, after a serious disruption: analysis of critical activities, continuity plans, recovery times and regular tests. ISO 22301 is the dedicated standard for it.
- 27001
C
- Calibration
- Comparing a measuring instrument with a reference whose value can be traced back to national or international standards. Calibrated instruments are labelled and protected against adjustment so that measurement results can be relied on.
- 9001
- Certification audit →
- The audit by an accredited certification body that leads to the certificate being issued. It has two stages: stage 1 checks readiness, stage 2 checks implementation and effectiveness in day-to-day operations.
- 90011400127001
- Certification body
- An independent organisation that audits management systems and issues certificates. Its competence for ISO certification is confirmed by a national accreditation body, in Germany the DAkkS and in the UK the UKAS.
- 90011400127001
- Change management
- The planned handling of changes to the management system or to processes: purpose and possible consequences are assessed in advance and resources and responsibilities are clarified, so that a change does not quietly weaken the system.
- 90011400127001
- Climate change in the management system
- Since an amendment in 2024, ISO management system standards explicitly require you to determine whether climate change is a relevant issue for your organisation, and point out that interested parties can have requirements related to it.
- 90011400127001
- Communication
- Planning which management system topics go to whom, on what occasion, by which channel and who is responsible, both inside and outside the organisation. Under ISO 14001 this includes handling enquiries and complaints from outside.
- 90011400127001
- Competence →
- What a person needs to know and be able to do to carry out their role in the management system properly, backed by education, training or experience. The organisation defines the need, closes gaps and checks whether the actions taken have worked.
- 90011400127001
- Compliance obligations →
- Laws, regulations, permit conditions and voluntary commitments such as customer requirements or industry agreements that an organisation has to or chooses to comply with in environmental matters. ISO 14001 requires you to identify them, keep them accessible and fulfil them.
- 14001
- Concession
- Explicit permission to use or deliver a product despite a deviation from the requirements, usually with the customer’s agreement. Who granted it and why is recorded.
- 9001
- Confidentiality
- One of the three protection goals of information security: only authorised people and systems gain access to a piece of information. It is compromised by data leaks, misdirected emails or access rights that are too broad.
- 27001
- Context of the organisation →
- The internal and external issues that affect whether the management system achieves its aims, such as market, technology, legislation, environmental conditions, company culture or staffing. It is the starting point for scope, risks and opportunities.
- 90011400127001
- Continual improvement
- The aim of making the management system and its results better step by step, based on evaluations, audits and management review. It means recurring, often small steps rather than a one-off project.
- 90011400127001
- Correction
- The action that removes or contains a detected error itself, such as rework, quarantine or replacement. It deals with the consequence, not the cause; that is the job of corrective action.
- 90011400127001
- Corrective action (CAPA) →
- An action that tackles the reason behind an error or nonconformity that has occurred, so that the problem does not happen again. It requires a root cause analysis and is only complete once its effectiveness has been checked. CAPA stands for corrective and preventive action.
- 90011400127001
- Customer complaint
- A customer’s complaint about a product or service. It is recorded, assessed and answered; justified complaints are nonconformities and go through correction and root cause analysis.
- 9001
- Customer focus
- The principle that customer requirements and expectations guide the work. In ISO 9001, top management ensures that customer requirements are known, risks to customer satisfaction are considered and satisfaction stays in view.
- 9001
- Customer satisfaction
- How customers perceive whether their expectations have been met. ISO 9001 requires you to monitor this perception, for example through surveys, feedback, complaints or conversations, and to evaluate the results.
- 9001
D
- Design and development
- The part of ISO 9001 that describes how a new product or service is created from requirements: planning, inputs, reviews, verification and validation, outputs and changes. If you do not design anything yourself, you can exclude it with a justification.
- 9001
- Document control →
- The rules by which documents are created, reviewed, approved, distributed, changed and archived. The aim is that the valid version is available at every workplace and obsolete ones are not used by mistake.
- 90011400127001
- Documented information →
- The common umbrella term in ISO standards for everything that is recorded: requirements such as procedures and policies as well as evidence of results. The former terms document and record are both covered by it.
- 90011400127001
E
- Effectiveness
- Whether an action, a process or the whole management system actually achieves what it was meant to. It shows in results, not in the fact that something was done; efficiency, by contrast, describes the ratio of result to effort.
- 90011400127001
- Effectiveness check
- The check, after a reasonable period, of whether an action such as a corrective action or a training course has delivered the intended result. It relies on data or samples and is recorded with date and outcome.
- 90011400127001
- EMAS
- The European Union’s environmental management scheme. It includes the requirements of ISO 14001 and additionally calls for a public environmental statement, its validation by an environmental verifier and entry in a register.
- 14001
- Emergency preparedness and response
- Preparing for emergencies with environmental consequences, such as fire, a spill of hazardous substances or flooding: identify scenarios, plan responses, keep resources ready, practise regularly and improve after drills or real events.
- 14001
- Environmental aspect →
- Anything about an organisation’s activities, products and services that touches the environment, such as energy use, exhaust gases, waste water, waste, noise or the handling of hazardous substances. The aspect is the cause, the environmental impact the effect.
- 14001
- Environmental impact
- The change to the environment that an environmental aspect causes, whether harmful or beneficial, such as air pollution from exhaust gases, soil contamination from leaks or raw materials saved through recycling.
- 14001
- Environmental management representative
- The person who coordinates the environmental management system on behalf of top management. ISO 14001 does not require a role by this name; it is distinct from officers required by law, for example for waste or emission control.
- 14001
- Environmental objective
- A measurable objective for environmental management, derived from the environmental policy, significant environmental aspects and compliance obligations, for example cutting electricity use per unit by a set percentage by a set date.
- 14001
- Environmental performance
- An organisation’s measurable results in managing its environmental aspects. ISO 14001 requires you to monitor, evaluate and improve it, but does not prescribe any particular values.
- 14001
- Environmental performance indicator
- An indicator that makes environmental performance measurable, such as energy use per tonne of product, waste rate or water use per employee. It shows whether environmental objectives are being met.
- 14001
- Environmental policy
- The policy for environmental management. Among other things, it contains commitments to protect the environment, fulfil compliance obligations and improve environmental performance, and it sets the framework for environmental objectives.
- 14001
- Environmental programme
- The plan for achieving environmental objectives: actions, responsibilities, resources, deadlines and how success will be checked. The term comes from earlier editions of the standard and from EMAS, but is still common in practice.
- 14001
- Environmental statement
- The public report that EMAS participants publish regularly, covering environmental policy, environmental aspects, objectives and indicators of environmental performance. It is validated by an accredited environmental verifier.
- 14001
- Evaluation of compliance
- The regular check under ISO 14001 of whether compliance obligations are actually being met. The result is recorded, and the organisation must be able to say at any time where it stands on compliance.
- 14001
- Exclusion (requirement not applicable)
- A requirement of the standard that does not apply to the organisation, for example design and development for a pure contract manufacturer. In ISO 9001 it has to be justified in the scope and must not affect the ability to deliver conforming products.
- 9001
- External providers
- Suppliers and service providers that deliver products, services or entire processes for the organisation. The standards require you to select, control and monitor what they provide according to defined criteria.
- 900127001
F
- FMEA
- A preventive method for systematically finding and assessing possible failures of a product or process, their effects and causes, before they occur. Widely used in design and production planning.
- 9001
G
- Gap analysis →
- A comparison of how far an organisation already meets the requirements of a standard and where gaps remain. It usually comes at the start of an implementation or before moving to a new edition of a standard.
- 90011400127001
- Greenhouse gas inventory
- The recording of an organisation’s or product’s greenhouse gas emissions, usually split into direct emissions, purchased energy and upstream and downstream emissions (scope 1, 2 and 3). ISO 14001 does not require it, but it provides figures for environmental aspects and objectives.
- 14001
H
- Harmonized Structure (HS) →
- The common framework of ISO management system standards, with the same ten clauses, core terms and core requirements. It makes it possible to run ISO 9001, ISO 14001 and ISO/IEC 27001 as one integrated system.
- 90011400127001
- Hazardous substances register
- The register of all hazardous substances on site with quantity, place of use and safety data sheet. In Germany the Hazardous Substances Ordinance provides for such a register; in environmental management it helps identify environmental aspects and emergency risks.
- 14001
I
- Indirect environmental aspect
- An environmental aspect that the organisation does not control itself but can influence, for example through purchasing, product design, transport providers or the way customers use its products.
- 14001
- Information classification
- Grouping information into levels according to how much protection it needs, for example public, internal, confidential and strictly confidential, combined with rules for labelling, storage, sharing and disposal.
- 27001
- Information security
- Protecting information in any form, whether digital, on paper or in people’s heads, against disclosure, tampering and loss. It is broader than IT security, because processes, premises and people are part of it too.
- 27001
- Information security event
- An observed condition or occurrence that points to a possible breach of information security, such as a suspicious login attempt. Only the assessment shows whether it becomes an incident.
- 27001
- Information security incident →
- One or more events that actually impair the confidentiality, integrity or availability of information, or are very likely to, such as a data leak, a ransomware infection or a file sent to the wrong recipient.
- 27001
- Information security objective
- A measurable or at least verifiable objective for information security, derived from the policy and the risks, such as a completion rate for training or a deadline for closing critical vulnerabilities.
- 27001
- Information security officer (CISO)
- The person who runs the ISMS on behalf of top management: coordinating risk assessment, tracking controls, analysing incidents and reporting. ISO/IEC 27001 does not require a role by this name, but it does require clear responsibilities.
- 27001
- Information security policy
- The statement of principles on information security adopted by top management: its importance, objectives or their framework, and the commitment to meet requirements and to improve. Topic-specific policies below it set out the details.
- 27001
- Input-output balance
- A comparison of what goes into a site, such as energy, water and materials, with what leaves it, such as products, waste, waste water and emissions. It provides figures for evaluating environmental aspects and for environmental performance indicators.
- 14001
- Integrated management system (IMS) →
- A management system that meets the requirements of several standards, for example for quality, environment and information security, through shared processes, roles and documents, instead of running a separate system for each standard.
- 90011400127001
- Integrity
- One of the three protection goals of information security: information and systems are complete, correct and have not been changed without anyone noticing. It is compromised by tampering, transmission errors or a file overwritten by mistake.
- 27001
- Interested parties →
- People and organisations that have expectations of the organisation or are affected by its decisions, such as customers, employees, authorities, suppliers, neighbours or insurers. The standards require you to know the relevant parties and their requirements.
- 90011400127001
- Internal audit →
- The organisation’s self-check at planned intervals: are its own requirements and those of the standard being met, and does the management system work in daily practice? It is carried out by people who are not responsible for the area being audited.
- 90011400127001
- Ishikawa diagram
- A root cause analysis tool that sorts the possible causes of a problem into categories such as people, machine, method, material, measurement and environment. Its shape resembles a fish skeleton with the problem at the head.
- 9001
- ISMS (information security management system) →
- The management system for information security under ISO/IEC 27001: the rules, roles, processes and records an organisation uses to identify its information risks, treat them and keep reviewing them.
- 27001
K
- Key performance indicator (KPI) →
- A measured value that shows how well a process, an objective or the management system is performing, such as on-time delivery, complaint rate, energy use per unit or time to close critical vulnerabilities. It comes with a target, a method of measurement and an owner.
- 90011400127001
L
- Legal register →
- The register of laws, regulations, permit conditions and other obligations that apply to an organisation, stating whom they affect and how they are met. Under ISO 14001 it is the usual way of managing compliance obligations.
- 1400127001
- Life cycle perspective →
- Looking at the environmental aspects of a product or service across all stages, from raw materials and procurement through manufacture, transport and use to disposal. ISO 14001 requires this perspective, but not a full life cycle assessment.
- 14001
M
- Major nonconformity →
- A nonconformity where a requirement is not met at all, or missed so far that the management system can no longer reliably achieve its intended results. It must be shown to be resolved before the certificate is issued or renewed.
- 90011400127001
- Management review →
- The regular review of the management system by top management: it looks at results, KPIs, audits, nonconformities, risks and changes, and decides on improvements, resources and necessary changes.
- 90011400127001
- Management system
- The interplay of objectives, rules, roles, processes and records with which an organisation manages and improves a topic such as quality, the environment or information security in a planned way.
- 90011400127001
- Minor nonconformity →
- A nonconformity where a requirement is not met in an individual case or only in part, without the management system as a whole failing to achieve its results. The organisation defines corrections; implementation is usually checked at the next audit.
- 90011400127001
- Monitoring and measurement
- Deciding what is observed and measured, by which methods, how often and when the results are analysed, so that you can show how the management system and its processes are performing.
- 90011400127001
N
- NIS2 →
- An EU directive on cyber security that sets out obligations on risk management, reporting significant incidents and the accountability of senior management for far more sectors and company sizes than before. Each member state transposes it into national law.
- 27001
- Nonconforming output
- A product or service that does not meet the requirements. ISO 9001 requires such outputs to be identified and controlled so that they are not used or delivered unintentionally, for example through labelling, quarantine, rework or a concession.
- 9001
- Nonconformity
- The general term in the standards for a requirement that has not been met, wherever it occurs: in a product, a process, the management system or an obligation. When found in an audit, it is often called an audit finding.
- 90011400127001
O
- Operational planning and control
- Planning and controlling the processes that deliver the actual product or service: setting criteria, running the processes accordingly, keeping records and keeping outsourced processes under control as well.
- 90011400127001
- Opportunity
- A possibility arising from the context or from change that the organisation can make use of, such as a new market, a new technology or a more efficient way of working. The standards require opportunities to be determined just as risks are.
- 90011400127001
- Opportunity for improvement
- An audit observation that is not a nonconformity but points to a weakness or an opening. The organisation decides for itself whether and how to act on it, though it is worth recording that decision.
- 90011400127001
- Organisational knowledge
- The knowledge an organisation needs for its processes and for conforming products, such as lessons from projects, recipes or the tricks of a particular machine. ISO 9001 requires you to determine it, retain it and extend it where needed.
- 9001
P
- PDCA cycle →
- A cycle of four steps: plan, do, check, act. It underlies the structure of ISO management system standards and applies to the system as a whole as well as to individual processes or actions.
- 90011400127001
- Policy →
- The direction for a management system set by top management, with a framework for objectives and commitments, for example to meet requirements and to improve. It is communicated internally and made available to interested parties where appropriate.
- 90011400127001
- Prevention of pollution
- Measures that stop emissions, waste and other burdens from arising, reduce them or capture them in a targeted way, for example through different substances, processes, recycling or treatment. In ISO 14001 it is part of the commitment to protect the environment.
- 14001
- Process
- A sequence of activities that turns inputs into a result, for example from order to delivery. A process has owners, resources, criteria and KPIs.
- 90011400127001
- Process approach
- The principle of understanding and managing the organisation as a network of interacting processes, each with clear inputs, outputs, owners, risks and KPIs. ISO 9001 explicitly requires it.
- 9001
- Process map →
- An overview of all the main processes of an organisation on one page, usually split into management, core and support processes, showing how they connect with each other and with the customer.
- 90011400127001
- Protection requirements
- How much protection a piece of information or a system needs, usually rated separately for confidentiality, integrity and availability, for example as normal, high and very high. The term comes from the German BSI IT-Grundschutz but is also used in ISO 27001 systems.
- 27001
Q
- Quality management representative (QMR)
- The person who coordinates the quality management system on behalf of top management. Since 2015, ISO 9001 no longer requires a representative but clearly assigned responsibilities; in practice the role still often exists.
- 9001
- Quality manual
- A document giving an overview of the management system. Earlier editions of ISO 9001 required it; since 2015 it is optional, and many organisations keep it as an introduction for employees and auditors.
- 9001
- Quality objective →
- A measurable objective for quality management, derived from the quality policy, for example for complaint rate, on-time delivery or lead time. Each objective comes with a plan: actions, resources, owner, deadline and how success will be checked.
- 9001
- Quality policy
- The policy for quality management: it describes what the organisation stands for in terms of quality, sets the framework for quality objectives and contains the commitment to meet requirements and to improve.
- 9001
R
- Recertification audit
- The audit before the three-year certificate expires, in which the certification body reviews the entire management system again. It has to take place in good time so that the new certificate follows on without a gap.
- 90011400127001
- Release of products and services
- The planned check of whether a product or service meets the requirements before it goes to the customer. The record shows who released it and on what basis.
- 9001
- Requirements for products and services
- Everything a product or service has to fulfil: explicit customer wishes, legal requirements and the organisation’s own commitments. Before an order is accepted, it is checked whether the organisation can meet them.
- 9001
- Residual risk
- The risk that remains after the planned controls have been implemented. Under ISO/IEC 27001, risk owners have to accept residual risks explicitly.
- 27001
- Risk
- The possibility that something uncertain affects your objectives, in ISO standards mostly understood as an adverse effect. It is usually assessed by likelihood and impact.
- 90011400127001
- Risk acceptance criteria
- Rules set in advance on the level above which a risk must be treated and up to which it may be accepted. ISO/IEC 27001 requires them so that repeated assessments lead to comparable results.
- 27001
- Risk assessment →
- Identifying, analysing and evaluating risks against defined criteria. In ISO/IEC 27001 this concerns risks to confidentiality, integrity and availability: consequences and likelihood are estimated and compared with the acceptance criteria.
- 90011400127001
- Risk owner →
- The person who answers for a particular risk and may decide how it is treated. Under ISO/IEC 27001, they approve the treatment plan and accept the residual risk.
- 27001
- Risk treatment
- The decision on what happens to an assessed risk: reduce it, avoid it, share it, for example through insurance or a service provider, or knowingly accept it. Controls are defined for risks that are reduced.
- 27001
- Risk treatment plan →
- The plan that records, for each risk to be treated, which controls will be implemented, who is responsible, by when and with what resources. Under ISO/IEC 27001 it has to be approved by the risk owner.
- 27001
- Risk-based thinking
- The idea in ISO standards of considering risks and opportunities in planning and decisions rather than only reacting to errors. In ISO 9001 it replaced the former separate clause on preventive action.
- 90011400127001
- Roles and responsibilities
- Top management’s decision on who has which tasks and authority in the management system, communicated so that everyone involved understands it. This includes who reports to top management on how the system is performing.
- 90011400127001
- Root cause analysis →
- The systematic search for the real reason behind an error or nonconformity, using methods such as 5 Whys or the Ishikawa diagram. Only a proven cause allows a corrective action that removes the problem for good.
- 90011400127001
S
- Scope →
- The definition of which sites, activities, products and services the management system covers. It is recorded in writing and later appears in substance on the certificate.
- 90011400127001
- Significant environmental aspect
- An environmental aspect that, according to the organisation’s own evaluation criteria, has or can have a significant environmental impact. Significant aspects determine where objectives, operational control and training are focused.
- 14001
- Stage 1 audit
- The first part of the certification audit. The certification body reviews documentation, scope and site conditions and decides whether the organisation is ready for the stage 2 audit.
- 90011400127001
- Statement of Applicability (SoA) →
- The ISO/IEC 27001 document that records, for every Annex A control, whether it is applied, why or why not, and how far it has been implemented. It links risk treatment to the controls actually selected.
- 27001
- Supplier evaluation →
- Selecting, assessing and regularly re-evaluating suppliers and service providers against defined criteria, such as quality, on-time delivery, environmental performance or information security. The result and any consequences are recorded.
- 90011400127001
- Surveillance audit →
- The annual audit by the certification body between initial certification and recertification. Each time it covers a few core topics and changing parts of the management system so that the certificate remains valid.
- 90011400127001
T
- Threat
- A possible source of harm to information or systems, such as malware, theft, a power cut or an operating error. A risk only arises when a threat meets a vulnerability.
- 27001
- TISAX
- An assessment and exchange mechanism for information security in the automotive industry, run by the ENX Association. It is based on the VDA ISA questionnaire, which builds on ISO/IEC 27001; the result is a label, not an ISO certificate.
- 27001
- Top management
- The managing directors or the group of people who lead the organisation or the part of it covered by the management system. They are accountable for the system and can delegate tasks, but not that accountability.
- 90011400127001
- Traceability
- The ability to follow the path of a product or component through production and delivery, for example by batch or serial numbers. ISO 9001 requires it where it is called for or needed for quality.
- 9001
- Turtle diagram
- A way of showing a single process in the shape of a turtle: the process in the middle, surrounded by inputs, outputs, resources, people, methods and KPIs. Common in the automotive industry and useful when preparing for process audits.
- 9001
V
- Vulnerability
- A weakness in a system, process or control that a threat can exploit, such as missing updates, weak passwords or an unlocked server room. Technical vulnerabilities are identified, assessed and fixed on an ongoing basis.
- 27001
