IMScollect
ISO 14001

ISO 14001, clause 6.1.2: Evaluating environmental aspects

Title in the standard: “Environmental aspects”

What in your operations affects the environment, how strongly, and how do you decide which of it is significant? Clause 6.1.2 of ISO 14001 from the audit’s point of view.

Philipp Kappe

Philipp Kappe

Founder of IMScollect

Updated 15 November 2026

What it is about

An environmental aspect is the way an activity, product or service interacts with the environment: electricity that is consumed, waste that is generated, solvents that evaporate. The environmental impact is the consequence, such as greenhouse gases, contaminated soil or dwindling raw materials. Clause 6.1.2 requires both to be determined, for what the organisation controls itself and for what it can only influence.

This includes looking beyond your own factory gate. The standard speaks of a life cycle perspective: from the sourcing of raw materials through transport and manufacture to the use and disposal of products. This does not mean a life cycle assessment. The point is to know the stages in which the organisation can make a difference, for example through requirements placed on suppliers, through the design of a product or through guidance on disposal.

Normal operation is not the only condition considered. Start-up and shutdown, maintenance, malfunctions and reasonably foreseeable emergencies belong in it too, as do planned changes such as a new plant or a new product. From all aspects, the organisation determines the significant ones using established criteria. They drive the rest of the system: they feed into risks and opportunities, objectives, training, operational control and emergency preparedness, and they are communicated within the organisation.

The aspects with their impacts, the criteria and the result, meaning which aspects are significant, have to be documented. In the audit, this evaluation is usually the first place where it shows whether an environmental management system has grown out of the organisation itself or comes from a template.

What the auditor checks

  • “How did you identify your environmental aspects?”

    Whether there is a traceable method behind it: along the processes, sites or activities, with a walk-through and with the people who work there. A list whose origin nobody can explain is hard to audit.

  • “What criteria do you use to decide whether an aspect is significant?”

    Whether the criteria are established and applied, for example scale, frequency, legal relevance and concerns of interested parties, with a scale and a threshold. The auditor then picks two or three aspects and checks whether the result really follows from the criteria.

  • “What is your most significant environmental aspect, and what do you do about it?”

    The chain through to effect. A significant aspect should show up in an objective, a requirement in a process, a training session or emergency preparedness. Anyone who can name their most important aspect but cannot say what follows from it has evaluated, not controlled.

  • “How far have you considered the life cycle of your products?”

    How far the life cycle perspective has to reach is not a fixed quantity. It depends on how important the item under consideration is and how its environmental aspects were evaluated. For a main product that uses a lot of energy in use, the auditor expects considerably more than for office supplies. What is checked is whether this weighing up is visible and can be justified.

  • “What happens in the event of a leak or when the plant starts up?”

    Whether abnormal operating conditions and emergencies have entries of their own. An evaluation that only knows the quiet everyday routine often misses precisely the aspects that become expensive in an emergency.

  • “Which significant environmental aspects are there in your area?”

    Asked not of the environmental management representative but of the supervisor in the paint shop or the warehouse manager. The evaluation has arrived when the answer, without looking it up, matches what is in the register, and when new plant, substances or products have left traces there since the last audit.

Which evidence convinces

  • A register of environmental aspects with impact, activity or process, operating condition and type of influence

    It is the documented information the standard requires and the starting point for every sample. Aspects that are directly controlled and those that can only be influenced should be distinguishable in it.

  • Established evaluation criteria with a scale and a threshold

    Without them there is no way of checking why one aspect is significant and another is not. If the threshold was ever changed, the reason belongs with it.

  • A justification wherever a decision was made by hand

    If an aspect is classified as significant or not significant in deviation from the calculated result, a sentence explaining why makes the decision traceable in the audit.

  • What follows from the significant aspects

    Objectives, work instructions, training, measurements or emergency plans that relate to a significant aspect. They show that the evaluation changes something in the organisation.

  • Evidence of the life cycle perspective

    Environmental criteria in purchasing, requirements for suppliers and hauliers, guidance on the use or disposal of the products. They show that influence beyond your own site is not merely claimed.

Typical nonconformities

  1. Evaluation without criteria

    Aspects are marked as significant, but nobody can say on what basis. If there are no established criteria at all, the requirement is not met, and that is a major nonconformity. If criteria exist but are not applied to individual aspects, it is a minor nonconformity.

  2. The life cycle is missing

    The register only shows aspects from in-house manufacturing and only direct ones. Purchasing, transport, use and disposal do not appear, even though the organisation could exert influence there, for example through the design of its products or through its suppliers.

  3. Normal operation only

    There is no entry for start-up and shutdown, maintenance or emergencies. With stores of water-polluting substances or with combustion plants, this becomes apparent quickly during the site tour.

  4. Significant, but without consequence

    An aspect is evaluated as significant but appears neither in objectives nor in processes, training or emergency preparedness. The evaluation then remains a sheet of paper without effect.

  5. Aspect and impact mixed up

    Cause and consequence are in one cell, or only impacts are listed, such as “climate change”, without the activity that contributes to them. That leaves it unclear where in the organisation action can be taken.

  6. The evaluation is frozen

    A site, a substance or a plant has been added, but the register still carries the date of initial certification.

Differences by standard

ISO 14001ISO 14001

Environmental aspects exist only in ISO 14001. They sit in clause 6.1.2, as part of planning for risks and opportunities; planning the related actions follows in 6.1.5 (6.1.4 in the 2015 edition). The 2026 edition keeps the life cycle perspective as an established principle but sharpens its application and, for outsourced activities, takes a broader view of externally provided processes, products and services. It also gives more weight to the chain from environmental aspects through compliance obligations and actions to measurable performance. More on this in the article on the 2026 edition linked below.

How IMScollect covers it

In IMScollect you keep your environmental aspects in a list with a heat map. Each aspect is linked to a process or an activity, is marked as direct or indirect and is rated from 1 to 5 in ten environmental areas, from energy and emissions through water, waste and soil to biodiversity. From the set threshold upwards, an aspect counts as significant. Anyone who departs from this sets the significance by hand and writes down the reason. Anything not yet rated is shown as “not rated” and not as “low”.

For each aspect you create an action with an owner and a deadline, which continues as a task, and you can see which hazardous substances are involved. Every change is recorded in the history, and the environmental aspects feed into the management review. The legal register and emergency preparedness live in the same system. The AI advisor Conni suggests environmental aspects that fit your processes; only what you approve is adopted.

Try it yourself, no call needed.Prefer a walkthrough? Book a guided demo →

Frequently asked questions

What is the difference between an environmental aspect and an environmental impact?▾

The environmental aspect is the cause within the organisation, the environmental impact is the change in the environment. The electricity consumption of the compressed air compressor is an aspect; the greenhouse gases from generating that electricity are its impact. Keeping them separate helps, because only the aspect is something you can control.

Do you need a life cycle assessment for the life cycle perspective?▾

No. ISO 14001 does not require a life cycle assessment under a separate standard. The question is which life cycle stages the organisation can control or influence and what it does there. How deep this goes depends on the importance of the product or activity and on the evaluation of its environmental aspects.

How many environmental aspects should an organisation have?▾

There is no fixed number. A small service provider manages with a few entries, a manufacturer with several sites has considerably more. More important than the number is that all activities have been considered and the evaluation is traceable.

What are indirect environmental aspects?▾

Aspects the organisation does not control itself but can influence: the manufacture of purchased parts, transport by hauliers, the use of the products by the customer or their disposal. Influence works there through purchasing, contracts, product design and information.

Further reading and viewing

Template for this clause

Philipp Kappe

Philipp Kappe

Founder of IMScollect

Philipp builds IMScollect. TÜV-certified auditor with a background in governance, risk and compliance, more than 200 audits conducted and supported.

This page explains in our own words and does not replace the text of the standard. You can obtain the standards from ISO(opens in a new window) or from your national standards body. Clause numbers and titles follow ISO 9001:2026, ISO 14001:2026 and ISO/IEC 27001:2022.