What it is about
Clause 9.1 asks whether the management system works, and first of all requires a decision: what is monitored and measured, with which methods so that the results are valid, when it is measured, and when and by whom the results are analysed. Measuring is not done for the sake of the figure. Good indicators are linked to the objectives and to the processes that matter for customers, the environment or information security; an indicator from which no decision ever follows proves nothing.
The figures alone say little. Only analysis and evaluation turn measured values into a statement: is the value on target, what is the trend, where do sites, products or customer groups differ, have the actions on risks and opportunities worked, how are suppliers performing, and where is improvement needed? This needs a benchmark to evaluate against and a person responsible for the evaluation.
ISO 9001 singles out one area, customer satisfaction (9.1.2). What has to be monitored is how customers themselves perceive whether their needs and expectations have been met; the organisation determines the methods itself. A questionnaire is one option, but neither the only one nor always the best: conversations, visits, feedback from service and sales, repeat business, warranty cases and complaints count just as much. A better picture usually comes from several short surveys at sensible touchpoints rather than one long annual questionnaire: after a resolved ticket, after a project, after a delivery and, at longer intervals, on the business relationship as a whole.
Measuring only becomes effective when the loop is closed: identify the deviation, check the cause, set an action with responsible person and date, check the effect at the next measuring point. The results feed into the management review, as trends, differences between customer groups and open actions, not just as an average.
What the auditor checks
“Which indicators steer your most important process, and who looks at them, and when?”
Whether the decision lives in daily work: indicator with target value, measuring method, frequency and responsible person. Anyone who first has to look up which indicator belongs to their area is not steering with it.
“What did you conclude from the last evaluation?”
Whether analysis and evaluation take place and data is not just collected: a comparison with the target and the previous period, a statement on the cause where a value deviates, and a decision. A table of measured values without a single sentence of evaluation is not yet an analysis.
“How do you know whether your customers are satisfied?”
Whether the methods are defined and use more than one source. Complaints alone are not enough: many dissatisfied customers do not complain, they order less or switch supplier later.
“What did you decide on the basis of the last survey?”
Whether something follows from the answers: a checked cause, an action with responsible person, date and effectiveness criterion, and a later look at whether it worked. This shows whether customer satisfaction is managed or merely measured.
“How many customers did you ask, how many replied, and can it be compared with last year?”
Whether the response rate has a traceable denominator and customer group, touchpoint and known gaps are visible, and whether core question, scale and selection rule have stayed stable or a change is documented. An average from a few answers looks precise, but is rarely robust.
“What happens when a customer gives a dissatisfied answer?”
Whether it is clear who is informed and when the customer gets a response. A survey without this way back tends to cause additional annoyance among dissatisfied customers.
Which evidence convinces
A definition of what is measured, when and how, and who evaluates it
For every indicator the target value, method, frequency and responsible person; for customer satisfaction also which types of survey are used at which touchpoints, which further sources and which selection rule. This makes the method you chose traceable in the audit.
Indicators with their history and a documented evaluation
Measured values over several periods, the comparison with the target and a sentence on what follows from it. Where measuring equipment is involved, also its verification or calibration, so that the values are valid.
Customer satisfaction evaluations with denominator, customer group and distribution
Customers invited, valid answers, response rate, touchpoint and known gaps. The distribution of answers often says more than the average: a mean of 4.0 can consist of very similar answers or of very satisfied and very dissatisfied customers.
The comparison with other customer signals
Complaints, claims, returns, repeat purchases, cancellations, on-time delivery. They are not the same as satisfaction, but they help to recognise contradictions and causes.
Actions arising from the results, with responsible person, date and effectiveness criterion
They show that the loop is closed and measuring does not end with the report.
The results in the management review
Trends of the indicators, differences between customer groups, important positive and negative feedback, the quality of the data and open actions. This shows that top management knows the situation and has decided on processes or resources.
Typical nonconformities
Indicators without definition
What is measured is whatever the software produces anyway, without target value, without defined frequency and without a responsible person. Nobody has decided whether the figures say anything about effectiveness.
Only the annual questionnaire
One long survey a year mixes very different experiences: the last ticket, a project nine months ago and the general cooperation end up in the same overall score. What exactly is going wrong can hardly be read from it.
Complaints as the only measure
Only what reports itself is measured; the perception of the many customers who do not complain remains unknown. This is usually a minor nonconformity, because the requirement is only partly met. If customers’ perception is not monitored at all, it is not met, and that is a major nonconformity.
Figures without evaluation and without consequences
Indicators and survey results are collected, but nobody evaluates them and no decision follows. If the evaluation is missing for individual indicators, this is usually a minor nonconformity. If nothing is evaluated at all, the system does not work at this point; that is a major nonconformity.
An average without a denominator, a trend without comparability
The report gives a mean, but not how many customers were asked and how many replied. Or the scale, the question or the selection of respondents has changed without this being recorded; a trend over the years can then not be shown.
The evaluation of compliance is missing (ISO 14001)
The legal register is maintained, but nobody has evaluated whether the obligations are actually fulfilled, or the evaluation consists only of a tick without evidence. If it is missing completely, the requirement is not met, a major nonconformity; if it is missing for individual obligations, a minor nonconformity.
Differences by standard
ISO 9001ISO 9001
ISO 9001 divides the clause into 9.1.1 General, 9.1.2 Customer satisfaction and 9.1.3 Analysis and evaluation. Only ISO 9001 has its own subclause on customer satisfaction; it does not require a particular questionnaire. In 9.1.3 it lists what is evaluated, including the conformity of products and services, customer satisfaction, the performance and effectiveness of the system, whether planning has been implemented, the effectiveness of actions on risks and opportunities, the performance of external providers and the need for improvement. For customer satisfaction, the guideline ISO 10004 and the ISO 9001 Auditing Practices Group paper on customer feedback help; measuring resources whose results must be valid are covered by 7.1.5.
ISO 14001ISO 14001
ISO 14001 monitors, measures, analyses and evaluates environmental performance against defined criteria and indicators, using calibrated or verified monitoring and measuring equipment, and communicates the results internally and externally as defined or as required by obligations. In addition there is a separate step, the evaluation of compliance: are the compliance obligations actually fulfilled, how often is this checked, and does the organisation know the current status? The internal audit does not replace this evaluation. In the 2026 edition, too, it sits in 9.1. Customer satisfaction is not a separate requirement here.
ISO 27001ISO/IEC 27001
ISO/IEC 27001 requires you to determine what is monitored and measured for information security, explicitly including processes and controls, with which methods, when, who analyses and when the results are evaluated. The methods should produce comparable and reproducible results. What is evaluated is information security performance and the effectiveness of the management system; customer satisfaction is not a separate requirement here either.
How IMScollect covers it
In IMScollect customer satisfaction has its own page with three tabs: feedback, surveys and templates. Every piece of feedback is linked to a customer from the interested parties, with sentiment, rating and a note on whether follow-up is needed. You build surveys from templates, invite recipients and set a duration; your customers reply without logging in, via a personal link.
You keep indicators for your objectives with measured values and responsible persons; their status follows from the figures, and you create an action directly from an indicator. You keep measuring equipment with its checks and a reminder of the next calibration. The results feed into the management review, with the course of customer satisfaction over the year, together with indicators, complaints and actions. For ISO 14001 you check compliance with every obligation in the legal register. The AI advisor Conni suggests feedback entries to create; only what you approve is adopted.
Frequently asked questions
How many indicators does a management system need?▾
The standards do not set a minimum. A proven approach is a few indicators per important process and per objective that are evaluated regularly and lead to decisions. Twenty indicators that nobody looks at convince less in the audit than five that top management actually talks about.
Does ISO 9001 require a customer satisfaction questionnaire?▾
No. The organisation has to monitor its customers’ perception with suitable methods it determines itself. Surveys are one option alongside conversations, complaints, repeat business and other customer signals.
How many questions should a customer satisfaction survey have?▾
There is no universal number. After a ticket, two to three questions are often enough, after a project three to six. What matters is to ask only what will be evaluated and can support a decision.
Which rating scale is suitable for customer satisfaction?▾
For short surveys among business customers, a fully labelled five-point scale is a good standard, from “very dissatisfied” to “very satisfied”. A three-point scale is often too coarse for trends, and more points do not automatically lead to better decisions. “Cannot judge” sits outside the scale and does not count towards the mean.
When should customer satisfaction be surveyed?▾
Immediately after a resolved ticket, after the completion of a project or an important milestone and, at longer intervals, on the business relationship as a whole. Blocking periods prevent the same person from being asked several times within a few days.
What is a good response rate for customer surveys?▾
There is no general target value. Response rate, number of cases, customer group, selection procedure and known biases have to be considered together and compared with your own baseline. With a few key accounts, one solid conversation counts for more than a high rate.
