What it is about
Clause 7.1 opens the part of the standards that carries the management system. The question is simple: does the organisation provide what it needs to run, maintain and improve its processes? That includes people, buildings, machines, IT and money, but also time. A process nobody has hours for is just as much a question of resources in the audit as a missing test instrument.
The standards do not prescribe any particular equipment. They ask for a deliberate judgement: what can the organisation do itself, and what does it obtain from outside? The basis is the processes from 4.4, the objectives from 6.2 and the actions on risks and opportunities.
ISO 9001 breaks the clause down most finely: people, infrastructure, the environment for the operation of processes, monitoring and measuring resources, meaning measuring equipment and its calibration, and organisational knowledge. ISO 14001 and ISO/IEC 27001 keep to a short principle; what counts as equipment there is spread across other clauses and, for ISO 27001, the controls in Annex A.
In the audit, 7.1 is rarely checked at a desk. It is checked on the way round: at the measuring instrument in production, in the server room, with the question of who takes over the tasks of a colleague who is about to retire. Resources show most clearly where they are missing.
What the auditor checks
“How do you notice that you are short of people or resources, and what do you do then?”
Whether there is a route by which bottlenecks reach top management, for example through indicators, overtime, actions left undone or the management review. An organisation that has never had a bottleneck has usually just not looked.
“When was this instrument last calibrated, and how does your colleague know it is valid?”
A label on the instrument, a calibration interval and a calibration certificate traceable to national or international measurement standards. Auditors like to pick an instrument that is in use right now rather than one from the list.
“What happens when an instrument fails its calibration?”
Whether someone checks which results were produced with it since the last valid check and whether they are still correct. This look back is missing more often than the calibration itself.
“Who can set up this machine once the colleague who does it today retires?”
Organisational knowledge (ISO 9001, 7.1.6). What is wanted is not a separate knowledge management system but a recognisable practice: instructions, induction, lessons learned from failures and projects, a planned handover before someone leaves.
“How do you keep buildings, machines and IT in good order?”
Maintenance plans and whether they are followed. Overdue maintenance on equipment that matters for quality, the environment or the availability of data quickly becomes visible on the tour.
“What conditions does this work need, and how do you make sure of them?”
The environment for the operation of processes: temperature, cleanliness or lighting, but also work pressure and how people treat each other. Whether the organisation knows which factors matter for its results and keeps an eye on them.
Which evidence convinces
Resources as a topic of the management review, with decisions
It shows that top management knows what is needed and has decided on resources, for example a new post, an investment or a deliberate decision against one.
A register of measuring and test equipment with interval, last and next check
Together with the calibration certificates and the label on the instrument, it gives an unbroken chain. For equipment that is checked before every use, the defined check before use is enough.
Maintenance plans with completed dates
They show that infrastructure is not only looked at once something breaks down.
Recognisable ways of securing and passing on knowledge
Work instructions, a wiki, induction plans, lessons learned after projects. Most convincing is an example in which knowledge was actually handed over before someone left.
An overview of staff with functions and responsibilities
It shows that tasks are assigned and deputies have been thought of, and it is also the basis for [competence](/en/standard-chapters/7-2-competence) in 7.2.
Typical nonconformities
Measuring equipment without a valid check
A calliper or torque wrench is in use although its check has expired, or an instrument is not in the register at all. A single instrument is usually a minor nonconformity, because the requirement is only not met in isolated cases. If the control of measuring equipment is missing altogether, the system is not working at this point, and it becomes a major nonconformity.
No look back after a failed calibration
The instrument was replaced, but nobody checked whether the parts measured with it since the last valid check were in order.
Knowledge depends on one person
A process only works because an experienced colleague carries it in her head. If she is absent, it stops. In the audit this shows when every question about the process is answered with just one name and nothing is written down.
Bottlenecks without consequences
Actions have been left undone for months, internal audits are cancelled because nobody has time, and the management review still says “resources sufficient”.
Maintenance only on paper
The maintenance plan exists, but the entries stop a year ago, or the inspection of safety-related equipment is overdue.
Differences by standard
ISO 9001ISO 9001
ISO 9001 has the most detailed clause 7.1, with six subclauses. Specific to it are the environment for the operation of processes (7.1.4) with physical, psychological and social factors, monitoring and measuring resources (7.1.5) with measurement traceability, and organisational knowledge (7.1.6). For measuring equipment it requires documented information as evidence that it is fit for purpose and, where traceability is required, calibration or verification at specified intervals or before use.
ISO 14001ISO 14001
In ISO 14001, 7.1 is a single principle: determine and provide the resources. Measuring equipment appears in clause 9.1.1: instruments used to monitor and measure environmental performance are calibrated or verified, maintained and used correctly. Resources often show here in emergency preparedness, for example drip trays, absorbents or firewater retention, and in competence for significant environmental aspects.
ISO 27001ISO/IEC 27001
ISO/IEC 27001 also keeps 7.1 to the principle. What counts as equipment is set out in the controls of Annex A, for example on IT capacity, the physical security of rooms and equipment, or maintenance. In the audit, 7.1 is therefore often checked through the question of whether information security has enough time and budget, and whether the role of the information security officer can be filled at all alongside day-to-day work.
How IMScollect covers it
In IMScollect, the page for 7.1 brings resources together in tiles: people, infrastructure, environment for the operation of processes, measuring equipment and organisational knowledge. Each tile shows the current status, for example maintenance that is due or measuring equipment that is due or locked, and takes you to the module where you maintain it. Which tiles appear depends on your standards.
You keep measuring equipment with its check interval, next check and traceability; a task is created for the responsible person ahead of the next check, and a failed check locks the instrument until a new check is passed. You describe the environment for the operation of processes as factors with an assessment, from which a risk can be derived. Buildings, machines and IT sit in the asset inventory with owner and maintenance, and organisational knowledge comes from where you already maintain it: in competences, training, documents and the wiki.
Frequently asked questions
Does all measuring equipment have to be calibrated?▾
No. Calibration or verification applies to the equipment whose results count as evidence of conformity, or where traceability is required, for example by the customer or by law. For everything else it is enough that it is fit for purpose and maintained. The organisation decides which instruments belong in the first group and should be able to justify that.
What is meant by organisational knowledge?▾
The knowledge needed for the processes and for products and services free of errors, which should not live only in individual heads: experience from projects, lessons from failures, the tricks of a machine, but also knowledge from outside such as standards or specialist events. ISO 9001 requires it to be determined, maintained and made available.
Does ISO 27001 require a certain number of staff for information security?▾
No. None of the three standards gives figures. In the audit it must still be clear that the work actually gets done: risks assessed, controls implemented, incidents handled. If that falls behind, the cause is often a lack of time.
Is money a resource?▾
Yes, even though the standards do not list it separately. A budget for calibration, training or security technology is a resource just like an instrument. In the audit this usually shows in the management review, when top management decides on resources.
