
IAF no longer operational: what old Combined Marks mean
The IAF has not been operational since 2026. How SMEs check certificate status, accreditation, Combined Mark and scope separately.
Philipp Kappe
Founder of IMScollect
Contents
- The short answer: what does a previous Combined Mark tell you?
- What changed on 1 January 2026
- Distinguishing between accreditation certificate and management system certificate
- Certification, accreditation and recognition are three levels
- Checking a management system certificate in seven steps
- 1. Match the certificate holder
- 2. Check the standard and edition
- 3. Read the scope and sites
- 4. Check the certificate status with the certification body
- 5. Verify accreditation separately
- 6. Clarify MRA scope and intended use
- 7. Document the result of the check in a traceable way
- Using IAF CertSearch and the DAkkS search correctly
- Managing certificates in the integrated management system
- Conclusion
Since 1 January 2026, the International Accreditation Forum (IAF) has no longer been operational. During the transition period, accredited management system certificates may nevertheless still show a previous Combined Mark made up of the accreditation body's symbol and the IAF MLA Mark.
This is neither a contradiction nor an automatic reason for invalidity. Conversely, however, the mark does not confirm that the specific certificate is still active or that it is sufficient for a particular customer, contract or market.
The short answer: what does a previous Combined Mark tell you?
A previous Combined Mark does not by itself make a management system certificate invalid after 1 January 2026. For the check, four questions must be kept separate:
- Did the named certification body actually issue the certificate, and is it still active?
- Was the certification body accredited for the certification concerned and operating within its scope of accreditation?
- Is the competent accreditation body a participant in the Global ACI MRA for the relevant scope?
- Does the specific customer, contract, contracting authority or regulator accept this evidence?
Whether the Combined Mark used is permitted is an additional labelling question. It does not replace any of these checks.
What changed on 1 January 2026
Global Accreditation Cooperation Incorporated, Global ACI for short, has been operational since 1 January 2026. The organisation has taken over the former international roles of IAF and ILAC. Since then, international multilateral recognition has run through the Global ACI MRA framework, no longer through separate IAF MLA and ILAC MRA systems.
The previous marks nevertheless do not disappear on a single worldwide cut-off date. Global ACI has laid down transition rules for the previously used IAF MLA and ILAC MRA Marks and for Combined Marks.
As of 26 August 2026, the new Global ACI MRA Mark has not yet been generally authorised for use by Full Members in any economy. Approval is expected at the earliest after a formal decision by the responsible Arrangement Committee scheduled for October 2026. Accredited certification bodies therefore cannot currently use a new Combined Mark either.
Distinguishing between accreditation certificate and management system certificate
For the transition rules, two types of document must be considered separately:
- An accreditation body issues an accreditation certificate to a certification body. Under the conditions of Global ACI MRA-006 Annex 1, previous IAF MLA or ILAC MRA Marks may temporarily continue to be used on it.
- An accredited certification body issues a management system certificate to a company. This may show a previously approved Combined Mark made up of the symbol of its accreditation body and the IAF MLA Mark.
As soon as the Global ACI MRA Mark is legally available in the economy concerned and the Global ACI Secretariat has formally announced this, the forward use of the previous marks ends under the transition rules. This affects new, renewed, reissued or amended accredited documents and results.
For a management system certificate that has already been issued, this alone means neither confirmation nor loss of its validity. The current certificate status must be checked with the certification body.
Certification, accreditation and recognition are three levels
A certification body assesses whether a company's management system meets the requirements of a standard. An accreditation body, by contrast, assesses the competence, impartiality and performance of the certification body for specific activities.
Accreditation is not required by law in every case. A non-accredited certificate is therefore not automatically ineffective. However, it is not an accredited certificate and is not covered by international MRA recognition. Customers, contracts, tenders or authorities may explicitly require an accredited certificate.
| Level | Check question |
|---|---|
| Certificate holder | Which legal entity, sites and activities does the management system certificate name? |
| Certification body | Did it issue the certificate, and what current status does it report? |
| Accreditation body | Was the certification body accredited for the management system standard and the relevant scope? |
| Global ACI MRA | Is the accreditation body a signatory for the relevant MRA scope and, where applicable, sub-scope? |
| Intended use | Does the specific customer, contract, contracting authority or regulator accept this evidence? |
Even existing MRA recognition does not automatically guarantee acceptance in every contract or market. The recipient's requirements remain a separate level of review.
Checking a management system certificate in seven steps
1. Match the certificate holder
Name, legal form and address must match the company being checked. For groups, you need to clarify which company was certified.
2. Check the standard and edition
The certificate must clearly name the standard concerned, for example ISO 9001:2015, ISO 14001:2015 or ISO 27001:2022. ISO itself does not issue these certificates.
3. Read the scope and sites
The scope describes the products, services, processes or activities covered. Annexes and site lists are part of the check. A company certificate does not automatically cover every branch and every service offered.
4. Check the certificate status with the certification body
The certification body or its certificate directory must confirm that the specific certificate is authentic and current. The issue and expiry dates on the PDF are not sufficient if the certificate has since been suspended, withdrawn or replaced.
5. Verify accreditation separately
If an accredited certificate is required or claimed, check in the accreditation body's directory whether the certification body was accredited for the management system standard concerned and the relevant technical scope. For accreditation by the German Accreditation Body (DAkkS), the official DAkkS directory must be used. However, it does not confirm the current status of the individual customer certificate.
6. Clarify MRA scope and intended use
For international recognition, the accreditation body must be a signatory for the MRA scope concerned. In addition, check whether the specific recipient accepts the evidence and which contract or procurement conditions apply.
7. Document the result of the check in a traceable way
For procurement, supplier management or internal audit evidence, we recommend recording the date of the check, the directories used, the result, the responsible person and, where applicable, a follow-up date. Scope and retention depend on risk and on internal and contractual requirements.
Using IAF CertSearch and the DAkkS search correctly
The IAF described CertSearch as a database for validating accredited management system certifications. In 2025, the IAF General Assembly agreed in principle to transfer the database to Global ACI by the end of 2025. However, the resolution set further conditions for this and proves neither that the transfer has been completed nor that the database is currently complete.
An existing CertSearch record can be an additional indication in the check. A missing match, on the other hand, is not proof that a certificate is invalid.
The two verification routes serve different purposes:
- The certification body or a suitable certificate database confirms the authenticity and current status of the specific certificate.
- The accreditation body's directory confirms the accreditation and scope of accreditation of the certification body.
Global ACI also recommends that buyers first check the conformity assessment body named on the document and then the competent accreditation body.
Managing certificates in the integrated management system
Your own certificates and relevant third-party evidence should not merely be filed as PDFs. A shared register can record at least the following information:
- standard and year of edition
- certificate holder, sites and scope
- certification body and accreditation body
- current certificate status
- scope of accreditation
- MRA scope, where relevant
- requirements of the specific intended use
- evidence of the check, responsible person and follow-up date
The organisational structure is the same for ISO 9001:2026, ISO 14001:2026 and ISO 27001:2022. The subject-matter assessment of the scope remains specific to each standard.
The white paper “Integrated management system: what ISO 9001, 14001 and 27001 really share” shows how shared structures work across several standards and where the separation must remain.
Conclusion
The IAF has no longer been operational since the beginning of 2026. A previous Combined Mark made up of the accreditation body's symbol and the IAF MLA Mark may nevertheless appear on an accredited management system certificate during the regulated transition period. The mark alone confirms neither the current certificate status nor its acceptance for a specific purpose.
The following must therefore be checked separately: the identity and scope of the certificate holder, authenticity and current status with the certification body, accreditation and scope of accreditation of the certification body, and the requirements of the specific recipient. IMScollect can manage the recorded information, evidence of checks, responsibilities and follow-ups in a traceable way.
Frequently asked questions
Are certificates with an old IAF mark still valid in 2026?▾
The previous Combined Mark made up of the accreditation body's symbol and the IAF MLA Mark makes a management system certificate neither automatically valid nor invalid. The current status must be checked with the certification body; accreditation, MRA recognition and the specific intended use must be assessed separately.
What is a Combined Mark on a management system certificate?▾
A Combined Mark combines the accreditation body's symbol with the IAF MLA Mark. It shows a link to accreditation but does not replace checking the specific certificate status or the scope of accreditation.
What is Global ACI and what happened to the IAF?▾
Global ACI has been operational since 1 January 2026 and has taken over the former international roles of IAF and ILAC. The IAF is no longer operational; its website is maintained as an archive.
Why is the new Global ACI mark missing from current certificates?▾
As of 26 August 2026, the new Global ACI MRA Mark has not yet been generally authorised for use. Approval is expected at the earliest after the formal decision scheduled for October 2026.
Where do you check the status and accreditation of a certificate?▾
The status of the specific certificate is confirmed by the certification body or a suitable certificate directory. The directory of the competent accreditation body, in Germany the DAkkS search, confirms instead the accreditation and scope of accreditation of the certification body.



