IMScollect
Cover image “VSME becomes VS. Using environmental data.”: an electricity meter, water carafe, waste bin and folder on a wooden tray, each linked by an orange thread to a single orange report folder.
Blog

VSME becomes VS: what ISO 14001 data you already have

The Voluntary Standard has applied since 24 September 2026. Which disclosures ISO 14001 can supply, what is still missing and where it falls short.

ISO 14001Objectives & KPIsEnvironmental aspects & hazardous substancesSuppliers & procurement
Philipp Kappe

Philipp Kappe

Founder of IMScollect

Published 15 October 20266 min read
Contents

A customer's questionnaire asks about energy consumption, greenhouse gases and waste volumes, and the bank wants the same for its credit assessment. If you run an environmental management system according to ISO 14001, you already have many of these figures: meter readings, waste disposal records, measurement reports, environmental objectives. Since 24 September 2026, there has been a binding European frame of reference for this, the Voluntary Standard (VS). This article shows, disclosure by disclosure, which environmental data from ISO 14001 can be reused for the VS, what needs to be checked and where environmental management is not enough.

VSME becomes VS: what changed on 24 September 2026

The VSME was a voluntary reporting standard from EFRAG that the European Commission took up in 2025 with Recommendation (EU) 2025/1710. Its successor is Delegated Regulation (EU) 2026/1560 with the Voluntary Standard (VS): adopted by the Commission on 3 July 2026, published in the Official Journal of the EU on 21 September 2026, in force since 24 September 2026.

Four points matter in practice:

  • Reporting remains voluntary. What is new is its status: the standard is now set out in an EU regulation and no longer in a recommendation.
  • The group of users is larger. The VS is aimed at companies outside the CSRD reporting obligation with on average up to 1,000 employees.
  • Recommendation (EU) 2025/1710 no longer has any legal effect. VSME reports already prepared remain usable, but should state which text they were prepared under.
  • The VS limits data requests. For financial years beginning on or after 1 January 2027, companies required to report may generally only request the data points from Annex II from protected companies in their value chain for their CSRD reporting.

Who exactly is still required to report and what the simplified ESRS change is explained in our article CSRD 2026: what now applies after Omnibus, the Voluntary Standard and the new ESRS. Here we deal with the question that follows: which data is already available?

Basic module and comprehensive module

The VS adopts the modular structure of the VSME. The basic module (B1 to B11) is the minimum level; the comprehensive module (C1 to C9) requires it and adds to it.

AreaBasic moduleComprehensive module
BasisB1 Basis for preparation, B2 Practices, policies and future initiativesC1 Business model and strategy, C2 Description of practices and policies
EnvironmentB3 Energy and greenhouse gas emissions, B4 Pollution of air, water and soil, B5 Biodiversity, B6 Water, B7 Resource use, circular economy and waste managementC3 GHG reduction targets and climate transition, C4 Climate risks
SocialB8 to B10 Workforce, health and safety, remuneration and trainingC5 to C7 Additional workforce disclosures and human rights
GovernanceB11 Convictions and fines for corruptionC8 Revenues from certain activities, C9 Gender ratio in the governance body

For an environmental management system, B3 to B7 and, in the comprehensive module, C3 and C4 are therefore of particular interest. It can contribute environmental policy and environmental objectives to B2 and C2.

For companies with no more than ten employees, several environmental disclosures are explicitly voluntary, including energy consumption and greenhouse gas emissions in B3, the water disclosures in B6 and the waste disclosures in B7.

Which environmental data from ISO 14001 is already available

The following mapping is a working mapping, not a statement of conformity. It shows where an environmental management system typically holds data and what still needs to be done before passing it on.

VS disclosureWhat the VS requiresWhere the data comes from in environmental managementWhat is usually still missing
B3 Energytotal energy consumption in MWh, broken down into renewable and non-renewable for electricity and fuelsinvoices, meter readings, energy sources from the environmental aspects, fleet dataconversion into MWh, breakdown by source, completeness across all sites
B3 Greenhouse gasesestimated gross emissions in t CO2e, Scope 1 and location-based Scope 2consumption data as activity data, an emissions inventory if availableemission factors, calculation method, organisational boundary
B4 Pollutionemissions to air, water and soil that are reported to authorities or recorded in the environmental management systempermits, measurement reports, emission declarations, limit value checksstandardise substance, medium, unit and period
B5 Biodiversitysites in or near biodiversity-sensitive areas, with the name of the areasite register, environmental aspects, permit documentscomparison with protected area maps
B6 Watertotal water withdrawal, consumption in water-intensive processes, consumption in areas of high water stresswater meters, wastewater notices, water as an environmental aspectdistinction between withdrawal and consumption, check for water stress
B7 Waste and resourceswaste volume by hazardous and non-hazardous, share of recycling and reuse, annual material use where material flows are significantwaste register, waste disposal records, waste balance, materials managementuniform unit (tonnes), recovery rate per waste type
C3 Climate targetsGHG reduction targets in absolute values, transition planenvironmental objectives and action programmebase year, target year, quantified reduction pathway
C4 Climate risksphysical risks and transition riskscontext analysis under clause 4.1, risks and opportunities, emergency preparednesstime horizons, estimate of financial impact

B4 stands out: here the VS explicitly names the environmental management system as a possible source of the disclosures. If you already record and assess emissions in the system, you are in the best starting position for this data point.

ISO 14001:2026 now explicitly names climate change, biodiversity, pollution and resource availability in the context analysis. This strengthens C4 and the environmental aspects. However, the standard does not prescribe a Scope 1 and 2 greenhouse gas inventory, and a general environmental objective does not replace reduction targets in absolute values. What else the new edition changes is covered in the article on ISO 14001:2026.

Where environmental management is not enough

The biggest gaps lie outside the environment. These disclosures come from HR, occupational health and safety, compliance and management:

  • workforce by type of contract, gender and country (B8),
  • work-related accidents and fatalities (B9),
  • minimum wage, collective bargaining coverage, training hours and pay gap (B10),
  • convictions and fines for corruption (B11),
  • in the comprehensive module, human rights, certain revenues and the composition of the governance body.

In addition, an ISO 14001 certificate does not prove that individual indicators have been calculated correctly. Certification and data quality are two separate checks. When passing data on, what counts is whether each figure can be traced back to source, period, method and approval.

Answering customer requests in five steps

To prevent every request from turning into a new collection exercise, a fixed procedure has proven its worth:

  1. Break down the request: record the data point, reporting period, unit and recipient.
  2. Classify the reason: the customer's CSRD report, a contractual requirement, a credit assessment or a voluntary disclosure. Only for the CSRD report does the upper limit from Annex II apply from 2027.
  3. Assign the source: name the existing measured value, evidence and the responsible specialist.
  4. Label the processing: direct transfer, conversion, estimate or data gap.
  5. Approve the answer: document the method, status and approval so that the next request builds on the same figure.

If you operate several standards, it is best to manage responsibilities, documents and approvals for this in one place. How ISO 9001, 14001 and 27001 share their structure is described in the white paper on the integrated management system.

What companies can prepare now

  • collect recurring questionnaires from customers and banks and map them to the VS disclosures,
  • keep energy, water and waste data per site in uniform units (MWh, cubic metres, tonnes),
  • record the source, method and responsible persons for each indicator,
  • define and document emission factors for Scope 1 and 2 once,
  • assign gaps outside environmental management to the departments responsible,
  • label existing VSME documents with the text applied.

EFRAG has announced an updated digital template and an XBRL taxonomy for the VS for the fourth quarter of 2026. Until then, it pays to keep the data clean rather than building automations on old VSME field identifiers.

How IMScollect supports you

IMScollect does not generate a finished VS report. The data behind it, however, is created in the management system and can be maintained there:

  • Environmental aspects are assessed across ten dimensions, including energy, emissions, water, waste and biodiversity, each linked to the process.
  • Indicators keep a history of measured values with responsible persons and due dates; a task is created automatically for the next measurement.
  • The legal register lists the relevant legal sources from environmental law, for example on immission control, waste, water and energy, from which many reporting obligations arise.
  • Documents such as measurement reports and waste disposal records are stored with version and approval in the same system.

This way, the next customer request meets maintained figures with source and responsible persons, instead of a search through folders and spreadsheets.

Frequently asked questions

Is the Voluntary Standard (VS) mandatory?▾

No. Reporting under the VS remains voluntary. What is new is that since 24 September 2026 the standard has been set out in an EU regulation, Delegated Regulation (EU) 2026/1560, and no longer only in a recommendation.

What is the difference between VSME and VS?▾

The VS builds on the VSME and adopts its basic module and comprehensive module. It is legally anchored, is aimed at companies outside the CSRD obligation with up to 1,000 employees and at the same time defines which data customers subject to the CSRD may request for their report.

Which environmental data from ISO 14001 can be used for the VS?▾

Above all energy consumption, emissions to air, water and soil, water withdrawal, waste volumes and site information on biodiversity (B3 to B7), as well as environmental objectives and the context analysis for climate targets and climate risks (C3, C4). Units, reporting boundaries and calculation methods must be checked before the data is passed on.

Is an ISO 14001 certificate enough for a VS report?▾

No. The certificate confirms the management system, not the accuracy of individual indicators. In addition, the VS requires disclosures on workforce, occupational health and safety, remuneration and corruption that do not come from environmental management.

From when does the upper limit for customer data requests apply?▾

For financial years beginning on or after 1 January 2027. It applies to requests that companies subject to the CSRD make for their sustainability reporting, and protects companies with on average up to 1,000 employees. Contractual requirements, bank assessments and other laws remain unaffected.

Sources