What it is about
With clause 8 the standards turn to the actual work: making products and providing services, protecting the environment in day-to-day operations, processing information securely. Clause 8.1 is the shared entry point. The organisation plans its processes, sets criteria they are to run by, controls them according to those criteria and records enough to show that they are carried out as planned.
All three standards share two further points. Planned changes in operations are controlled, and the consequences of unintended changes are reviewed so that adverse effects stay limited. And processes that others carry out for the organisation remain under its control: the heat-treatment subcontractor, the external data centre, the waste disposal company. The 2026 editions of ISO 9001 and ISO 14001 speak here of externally provided processes, products and services rather than outsourced processes.
After that the paths divide, more clearly than in any other clause. ISO 9001 uses clause 8 to cover the whole route from order to delivery, with pages of their own for customer requirements (8.2), design and development (8.3), external providers (8.4), production and service provision (8.5), release (8.6) and nonconforming outputs (8.7). ISO 14001 adds emergency preparedness (8.2) to 8.1. ISO/IEC 27001 carries out in 8.2 and 8.3 the risk assessment and risk treatment planned in 6.1.
This page therefore covers what all three standards have in common in 8.1 and what each of them additionally requires there. How the processes are structured is described in 4.4; 8.1 asks whether they are really controlled that way in everyday work.
What the auditor checks
“How does the operator at this station know whether his result is acceptable?”
Whether there are criteria for the process and for the result, such as tolerances, inspection plans, limit values or safety requirements, and whether they are known where the work is done.
“Show me an order from start to finish.”
Auditors follow a real case through operations and check at every station whether it ran to the defined requirements and whether the records show this.
“Which processes do you have others carry out, and how do you control them?”
Whether outsourced or externally provided processes are known and how far control extends: requirements in the contract, checks at goods receipt, audits at the provider, reports. A forgotten service provider is a common finding.
“What did you change when the new machine arrived, and who approved it?”
Whether planned changes in operations were controlled: consequences considered, requirements adjusted, staff informed. And for unintended changes, such as a breakdown, whether someone reviewed what follows from them.
“How do you make sure that your environmental requirements also reach purchasing and contractors?”
For ISO 14001, the life cycle perspective: environmental requirements in design and procurement, information to suppliers and to contractors on site, notes on transport, use and disposal of the product where it matters.
“When did you last carry out the risk assessment, and what has become of the treatment plan?”
For ISO 27001, the operation of the system itself: assessments at planned intervals and after significant changes, a treatment plan that is being implemented, and the results as documented information.
Which evidence convinces
Defined criteria for processes and results
Inspection plans, work instructions, acceptance criteria, operating instructions. They are the yardstick against which any control can be measured.
Records from ongoing operations
Inspection records, order documents, releases, monitoring records. They show that the processes ran as planned, and there should be as many as that requires.
An overview of outsourced or externally provided processes with the type of control
Who does what for the organisation and how it is controlled. It also makes it possible to check providers that do not appear as suppliers in purchasing, such as IT support or waste disposal.
Evidence of controlled changes
A change request with a review of consequences, adjusted requirements and approval, or a documented review for unintended changes.
The operational evidence specific to each standard
For ISO 9001 the evidence from 8.2 to 8.7, for ISO 14001 the operating criteria for significant environmental aspects and emergency preparedness, for ISO 27001 the results of risk assessment and risk treatment.
Typical nonconformities
Outsourced process not controlled
A provider takes over part of the work, such as surface treatment, IT operations or waste disposal, but there are neither requirements nor a check of the result. If control is missing altogether for a process that is essential for products or security, that is a major nonconformity. If the requirements are only incomplete, it is a minor nonconformity.
Criteria missing where the work is done
The office has inspection plans, but at the station nobody knows which tolerance applies or when a part has to be rejected.
Change without control
A new machine, a new material or new software is in use without the consequences having been reviewed, requirements adjusted and staff briefed.
Records do not show the process
An inspection per batch is required, but only individual days are recorded. It then cannot be shown whether the process ran as planned.
Life cycle only on paper (ISO 14001)
The environmental aspects mention transport and disposal, but purchasing and suppliers hear nothing of environmental requirements, and contractors on site do not know the rules.
Risk treatment at a standstill (ISO 27001)
The assessment dates from the previous year, half of the treatment plan is still open, and after a major change, such as the move to the cloud, there was no new assessment.
Differences by standard
ISO 9001ISO 9001
In ISO 9001, 8.1 is the bracket around the whole operations clause. It includes determining the requirements for products and services, setting criteria for the processes and for the acceptance of outputs, determining the resources needed and recording as much as is needed for confidence in the processes and to demonstrate conformity. How the individual steps are audited is covered on the separate pages for 8.2 to 8.7; the control of external providers is explored further in 8.4.
ISO 14001ISO 14001
In 8.1, ISO 14001 requires operating criteria for the processes the environmental management system needs and through which the actions from 6.1 and 6.2 are implemented, above all for activities with significant environmental aspects and compliance obligations. A note sets out an order of preference for this, from elimination through substitution to administrative controls. Specific to it is the life cycle perspective: environmental requirements in design and procurement, passing them on to suppliers and contractors and, where necessary, information about impacts during transport, use and disposal. With the 2026 edition, planning of changes has been given a clause of its own, 6.3. Emergency preparedness follows in 8.2.
ISO 27001ISO/IEC 27001
ISO/IEC 27001 requires the same framework in 8.1: criteria for the processes, control according to them, records, controlled changes and control of externally provided processes, products or services relevant to the management system, such as cloud services. It then carries out risk assessment in 8.2 at planned intervals and when significant changes occur, and implements the treatment plan in 8.3, both with documented results. The controls themselves are set out in the Statement of Applicability and in Annex A.
How IMScollect covers it
In IMScollect, the page for 8.1 brings together the status of the tools for operations in tiles: core processes, outsourced processes, hazardous substances for ISO 14001, and the documents for operations. One click takes you to where you maintain them, and for each requirement you record how far it has been implemented.
You draw the processes themselves under processes as BPMN diagrams, with owners, resources, risks and opportunities and released versions. The parts specific to each standard have pages of their own: for ISO 9001 the order review before acceptance, suppliers with approval and re-evaluation, product release and complaints; for ISO 14001 emergency preparedness with emergency plans and exercises; for ISO 27001 risk treatment with the controls from the Statement of Applicability.
Frequently asked questions
Why is clause 8 so different in the three standards?▾
Because this is where the subject-matter core of each standard lies. Clauses 4 to 7, 9 and 10 follow the shared structure and combine well. In clause 8, ISO 9001 is about products and services, ISO 14001 about environmental protection in operations and emergency preparedness, and ISO 27001 about risk assessment and risk treatment.
What are outsourced processes?▾
Processes that belong to the organisation’s own management system but are carried out by another company, such as contract manufacturing, calibration, payroll or IT operations. Responsibility stays with the organisation. The 2026 editions of ISO 9001 and ISO 14001 cover this under externally provided processes, products and services.
Does every process need a written instruction?▾
No. As much is documented as is needed to have confidence that the processes run as planned. An experienced team needs less paper for a simple process than a new team does for a critical one. The criteria must still be known, written down or not.
Can clause 8 be audited jointly for several standards?▾
Yes, along a real process. One order can be checked at the same time for quality, environmental requirements and the handling of customer data. The evaluation remains separate for each standard, because each requires something different at this point.
